Draytek Vigor2762 series User Manual page 648

Example Example
> wol fromWan on
> wol fromWan_Setting 1 192.168.1.45 255.255.255.0
>
Telnet Command: user
Telnet Command: user
The command is used to create new user account profiles.
Syntax Syntax
User set [-a|-b|-c|-d|-e|-l|-o|-q|-r|-s|-u]
user edit [PROFILE_IDX] [-a|-d|-e|-f|-i|-m|-n|-p|-q|-r|-s|-t|-u|-v|-w|-x|-A|-H|-T|-P|-l]
user account [USER_NAME] [-d|-q|-r|-t|-w]
user setdefault
Syntax Description
Syntax Description
Parameter
set
edit
account
User Set
-a[Profile idx][User name]
[IP_Address]
-c[user name]
-c all
-d
-e
-l all
-l userl
-l ip
-o
-q
-r [user name | all]
-s
-buser [user name]
-b ip [ ip address]
638
Description
It means to configure general setup for the user management.
It means to modify the selected user profile.
It means to set user account.
It means to pass an IP Address.
Profile idx- type the index number of the selected profile.
User name- type the user name that you want it to pass.
IP_Address- type the IP address that you want it to pass.
Clear the user record.
user name – type the user name that you want to get clear
corresponding record.
all – all of the records will be removed.
Disable User management function.
Enable User management function.
Show online user.
all – all of the users will be displayed on the screen.
user name – type the user name that you want to view on the
screen.
ip – type the IP address that you want to view on the screen.
It means to show user account information.
e.g.,-o
It means to trigger the alert tool to do authentication.
Remove the user record.
user name – type the name of the user profile.
all – all of the user profile settings will be removed.
It means to set login service.
0:HTTPS
1:HTTP
e.g.,-s 1
Block specifies user or IP address.
user name – type the user name that you want to block.
Vigor2762 Series User's Guide