Draytek Vigor2762 series User Manual page 613

We recommend that you reboot the system now.
> vlan sysvid show
The system VLAN ID is in range: 200 ~ 263
Telnet Command:
Telnet Command:
This command allows users to set advanced parameters for LAN to LAN function.
vpn l2lset [list index] peerid [peerid]
vpn l2lset [list index] localid [localid]
vpn l2lset [list index]main [auto/proposal index]
vpn l2lset [list index] aggressive [g1/g2]
vpn l2lset [list index]pfs [on/off]
vpn l2lset [list index] phase1[lifetime]
vpn l2lset [list index] phase2[lifetime]
Syntax Description Syntax Description
Parameter
list index
peerid
localid
main
auto index
proposal index
aggressive
pfs
on/off
phase1
lifetime
phase2
Example Example
> VPN l2lset 1 peerid 10226
Telnet Command:
Telnet Command:
This command allows users to configure setting for remote dial-in VPN profile.
vpn dinset <list index>
vpn dinset <list index> <on/off>
vpn dinset <list index> motp <on/off>
vpn dinset <list index> pin_secret <pin> <secret>
Syntax Description
Syntax Description
Parameter
<list index>
Vigor2762 Series User's Guide
vpn l2lset
vpn l2lset
Description
It means the index number of L2L (LAN to LAN) profile.
It means the peer identity for aggressive mode.
It means the local identity for aggressive mode.
It means to choose proposal for main mode.
It means to choose default proposals.
It means to choose specified proposal.
It means the chosen DH group for aggressive mode
It means "perfect forward secrete".
It means to turn on or off the PFS function.
It means phase 1 of IKE.
It means the lifetime value (in second) for phase 1 and phase 2.
It means phase 2 of IKE.
vpn dinset
vpn dinset
Description
It means the index number of the profile.
603