Draytek Vigor2762 series User Manual page 584

> switch on
Enable Extrnal Device auto discovery!
Telnet Command:
Telnet Command:
This command is used to turn off the auto discovery for external devices.
Example
Example
> switch off
Disable External Device auto discovery!
Telnet Command:
Telnet Command:
This command is used to display the connection status of the switch.
Example
Example
> switch list?
No.
Model_Name
------------------------------------------------------------------
---------
[1] 00-50-7f-cd-07-48
Vigor2920 Series
Telnet Command:
Telnet Command:
This command is used to reset the switch table and reboot the router.
switch clear [idx]
Syntax Description
Syntax Description
Parameter
idx
-f
Example
Example
> switch clear 1
Switch Data clear successful
> switch clear -f
Switch Data clear successful
Telnet Command:
Telnet Command:
This command is used to enable or disable the switch query.
Example
Example
> switch query on
Extern Device status query is Enable
> switch query off
Extern Device status query is Disable
Telnet Command:
Telnet Command:
574
switch off
switch off
switch list
switch list
Mac
192.168.1.3
switch clear
switch clear
Description
It means the index number of each item shown on the table.
The range is from 1 to 8.
It means to clear all of the data.
switch query
switch query
sys admin
sys admin
IP status
On-Line
Dur Time
00:01:01
Vigor2762 Series User's Guide