Draytek Vigor2762 series User Manual page 540

Syntax Description Syntax Description
Parameter
2/3/4
count
Example
Example
> msubnet nodetype ?
% msubnet nodetype <2/3/4> <count>
% Now: LAN2 0; LAN3 0; LAN4 0
% count: 1. B-node 2. P-node 4. M-node 8. H-node
> msubnet nodetype 2 1
% Set LAN2 Dhcp Node Type done !!!
> msubnet nodetype ?
% msubnet nodetype <2/3/4> <count>
% Now: LAN2 1; LAN3 0; LAN4 0
% count: 1. B-node 2. P-node 4. M-node 8. H-node
Telnet Command:
Telnet Command:
This command is used to configure primary WINS server.
msubnet primWINS [2/3/4] [WINS IP]
Syntax Description
Syntax Description
Parameter
2/3/4
WINS IP
Example
Example
> > msubnet primWINS ?
% msubnet primWINS <2/3/4> <WINS IP>
% Now: LAN2 0.0.0.0; LAN3 0.0.0.0; LAN4 0.0.0.0
> msubnet primWINS 2 192.168.3.5
% Set LAN2 Dhcp Primary WINS IP done !!!
530
Description
It means LAN interface.
2=LAN2
3=LAN3
4=LAN4
Choose the following number for specifying different node type.
1= B-node
2= P-node
4= M-node
8= H-node
0= Not specify any type for node.
msubnet primWINS
msubnet primWINS
Description
It means LAN interface.
2=LAN2
3=LAN3
4=LAN4
Type the IP address as the WINS IP.
Vigor2762 Series User's Guide