Draytek Vigor2762 series User Manual page 487

Telnet Command:
Telnet Command:
This command is available for WAN DHCP.
Syntax Syntax
ip dhcpc option
ip dhcpc option -h|l
ip dhcpc option -d [idx]
ip dhcpc option -e [1 or 0] -w [wan unmber] -c [option number] -v [option value]
ip dhcpc option -e [1 or 0] -w [wan unmber] -c [option number] -x "[option value]"
ip dhcpc option -e [1 or 0] -w [wan unmber] -c [option number] -a [option value]
ip dhcpc option -u [idx unmber]
ip dhcpc release [wan number]
ip dhcpc renew [wan number]
ip dhcpc status
Syntax Description
Syntax Description
Parameter
option
release
renew
status
Example
Example
>ip dhcpc status
I/F#3 DHCP Client Status:
DHCP Server IP
WAN Ipm
WAN Netmask
WAN Gateway
Primary DNS
Secondary DNS
Leased Time
Leased Time T1
Leased Time T2
Leased Elapsed
Vigor2762 Series User's Guide
ip dhcpc
ip dhcpc
Description
It is an optional setting for DHCP server.
-h: display usage
-l: list all custom set DHCP options
-d: delete custom dhcp client option by index number
-e: enable/disable option feature, 1:enable, 0:disable
-w: set WAN number (e.g., 1=WAN1)
-c: set option number: 0~255
-v: set option value by string
-x: set option value by raw byte (hex)
-u: update by index number
It means to release current WAN IP address.
It means to renew the WAN IP address and obtain another new
one.
It displays current status of DHCP client.
: 172.16.3.7
: 172.16.3.40
: 255.255.255.0
: 172.16.3.1
: 168.95.192.1
: 0.0.0.0
: 259200
: 129600
: 226800
: 259194
477