Draytek Vigor2762 series User Manual page 583

Syntax Description Syntax Description
Parameter
switch idx_no
option
cmd
acc
traffic
[on/off/status/tx/rx]
Example
Example
> switch -i 1 traffic on
External Device NO. 1 traffic statistic function is enable
Telnet Command:
Telnet Command:
This command is used to check the status for the auto discovery of external devices.
Example
Example
> switch status
External Device auto discovery status : Disable
No Respond to External Device : Enable
Telnet Command:
Telnet Command:
This command is used to detect the external device automatically and display on this page.
Syntax
Syntax
switch not_respond 0
switch not_respond 1
Syntax Description
Syntax Description
Parameter
0
1
Example
Example
> switch not_respond 1
slave not respond!
>
Telnet Command:
Telnet Command:
This command is used to turn on the auto discovery for external devices.
Example
Example
Vigor2762 Series User's Guide
Description
It means the index number of the switch profile.
The available commands with parameters are listed below.
cmd
acc
traffic [on/off/status/tx/rx]
It means to send command to the client.
It means to set the client authentication account and password.
It means to turn on/off or display the data transmission from the
client.
switch status
switch status
switch not_respond
switch not_respond
Description
Disable the option of "No Respond to External Device packets".
Enable the option of "No Respond to External Device packets".
switch on
switch on
573