Draytek Vigor2762 series User Manual page 636

wan budget wan [#] thres [budget limit (MB)]
wan budget wan [#] gthres [budget limit (GB)]
wan budget wan [#] mode [monthly|periodic|none]
wan budget wan [#] psday [th day in periodic]
wan budget wan [#] action [action bitmap]
wan budget status
Syntax Description
Syntax Description
Parameter
wan[#]
rdate
enable/disable
thres [budget limit (MB)]
gthres [budget limit (GB)]
mode [monthly|periodic|
none]
psday [th day in periodic]
action [action bitmap]
status
Example
Example
> wan budget wan 1 action 5
% WAN 1 budget action set to 5
> wan budget wan 1 gthres 10
% WAN 1 budget limit set to 10 GB
Telnet Command:
Telnet Command:
This command allows you to run a WAN MTU Discovery. The user can specify an IPv4 target
to ping and find the suitable MTU size of the WAN interface.
Syntax
Syntax
wan detect_mtu -w [number] -i [Host/IP address] -s [base_size] -d [decrease_size] (-c
[count])
626
Description
Specify the WAN interface.
Specify the WAN budget refresh time.
day – Available settings are from 1 to 30.
hour – Available settings are from 1 to 23.
E.g., wan budget wan 1 rdate 5 10
If monthy mode is selected: WAN budget will be refreshed on 5th
day at 10:00 in each month
If periodic mode is selected: WAN budget will be refreshed every 5
days and 10 hours
enable - Enable the function of wan budget.
disable - Disable the function of wan budget.
Specify the maximum value for WAN budget limit. (Unit: MB)
budget limit – Type a number.
Specify the maximum value of wan budget limit. (Unit: GB)
budget limit – Type a number.
Specify the calculation mode (monthly, periodically, or none) for
WAN budget.
It is used only when mode is set with "periodic". Specify the order
of "today" in the cycle.
E.g., wan budget wan 5 psday  It means "today" is the 5
day in the billing cycle.
Determine the action to be performed when it reaches the WAN
budget limit.
action bitmap – Type a total number of actions to be executed.
Different numbers represent different actions.
1: shotdown wan
2: send mail alert
4: send sms alert
For example, if you type "5" (5=1+4), the system will send SMS
alert when WAN shotdown is detected.
Display current configuration status of WAN budget.
wan detect_mtu
wan detect_mtu
Vigor2762 Series User's Guide
th