Draytek Vigor2762 series User Manual page 542

Telnet Command:
Telnet Command:
This command is used to set TFTP server for multi-subnet.
msubnet tftp [2/3/4] [TFTP server name]
Syntax Description
Syntax Description
Parameter
2/3/4/5/6
TFTP server name
Example
Example
> msubnet tftp ?
% msubnet tftp <2/3/4> <TFTP server name>
% Now: LAN2
> msubnet tftp 2 publish
% Set LAN2 TFTP Server Name done !!!
> msubnet tftp ?
% msubnet tftp <2/3/4> <TFTP server name>
% Now: LAN2 publish
Telnet Command:
Telnet Command:
This command allows you to configure MTU value for LAN/IP Routed Subnet.
msubnet mtu [interface][value]
Syntax Description
Syntax Description
Parameter
interface
value
Example
Example
> msubnet mtu LAN1 1492%
Set LAN1 subnet mtu as 1492
> msubnet mtu ?
Usage:
>msubnet mtu <interface> <value>
<interface>: LAN1~LAN4,IP_Routed_Subnet,
1496 (Bytes), de
532
msubnet tftp
msubnet tftp
Description
It means LAN interface.
2=LAN2
3=LAN3
4=LAN4
Type a name to indicate the TFTP server.
LAN3
LAN4
LAN3
LAN4
msubnet mtu
msubnet mtu
Description
Available settings include LAN1~LAN4, IP_Routed_Subnet.
1000 ~ 1508 (Bytes), default: 1500 (Bytes)
<value>: 1000 ~
Vigor2762 Series User's Guide