Draytek Vigor2762 series User Manual page 531

Telnet Command:
Telnet Command:
This command can block specified port for passing through the router.
mngt defenseworm [on]
mngt defenseworm [off]
mngt defenseworm [add port]
mngt defenseworm [del port]
mngt defenseworm [viewlog]
mngt defenseworm [clearlog]
Syntax Description
Syntax Description
Parameter
on
off
add port
del port
viewlog
clearlog
Example
Example
> mngt defenseworm add 21
Add TCP port 21
Block TCP port list: 135, 137, 138, 139, 445, 21
> mngt defenseworm del 21
Delete TCP port 21
Block TCP port list: 135, 137, 138, 139, 445
Telnet Command:
Telnet Command:
This command can allow the system administrators to login from the Internet. By default, it
is not allowed.
mngt rmtcfg [status]
mngt rmtcfg [enable]
mngt rmtcfg [disable]
mngt rmtcfg [http/https/ftp/telnet/ssh/tr069] [on/off]
Syntax Description
Syntax Description
Parameter
status
enable
disable
http/https/ftp/telnet/ssh/
tr069
on/off
Vigor2762 Series User's Guide
mngt defenseworm
mngt defenseworm
Description
It means to activate the function of defense worm packet out.
It means to inactivate the function of defense worm packet out.
It means to add a new TCP port for block.
It means to delete a TCP port for block.
It means to display a log of defense worm packet, including source
MAC and source IP.
It means to remove the log of defense worm packet.
mngt rmtcfg
mngt rmtcfg
Description
It means to display current setting for your reference.
It means to allow the system administrators to login from the
Internet.
It means to deny the system administrators to login from the
Internet.
It means to specify one of the servers/protocols for enabling or
disabling.
on – enable the function.
521