Draytek Vigor2762 series User Manual page 193

Tx Power
WMM Capable
APSD Capable
RTS Threshold (1 – 2347)
Country Code
After finishing all the settings here, please click OK to save the configuration.
Vigor2762 Series User's Guide
Set the power percentage for transmission signal of access
point. The greater the value is, the higher intensity of the
signal will be.
To apply WMM parameters for wireless data transmission,
please click the Enable radio button.
The default setting is Disable.
Minimize the collision (unit is bytes) between hidden
stations to improve wireless performance.
Set the RTS threshold of wireless radio. Do not modify
default value if you don't know what it is, default value is
2347.
Vigor router broadcasts country codes by following the
802.11d standard. However, some wireless stations will
detect / scan the country code to prevent conflict
occurred. If conflict is detected, wireless station will be
warned and is unable to make network connection.
Therefore, changing the country code to ensure successful
network connection may be necessary for some clients.
183