Ii-1-2-5 Details Page For Pptp/L2Tp In Ethernet Wan - Draytek Vigor2762 series User Manual

Adsl2/2+ and vdsl2 router

Hide thumbs Also See for Vigor2762 series:

Table of Contents

II-1-2-5 Details Page for PPTP/L2TP in Ethernet WAN

To use PPTP/L2TP as the accessing protocol of the internet, please click the PPTP/L2TP

tab. The following web page will be shown.

Available settings are explained as follows:

ISP Access Setup

Vigor2762 Series User's Guide

Enable PPTP- Click this radio button to enable a PPTP

client to establish a tunnel to a DSL modem on the WAN

Enable L2TP - Click this radio button to enable a L2TP

client to establish a tunnel to a DSL modem on the WAN

Disable – Click this radio button to close the connection

through PPTP or L2TP.

Server Address - Specify the IP address of the PPTP/L2TP

server if you enable PPTP/L2TP client mode.

Specify Gateway IP Address – Specify the gateway IP

address for DHCP server.

Username -Type in the username provided by ISP in this

field. The maximum length of the user name you can set is

63 characters.

Password -Type in the password provided by ISP in this

field. The maximum length of the password you can set is

62 characters.

Index (1-15) in Schedule Setup - You can type in four sets

of time schedule for your request. All the schedules can be

set previously in Application >> Schedule web page and

you can use the number that you have set in that web page.

It means Max Transmit Unit for packet.

Path MTU Discovery – It is used to detect the maximum

MTU size of a packet not to be segmented in specific

Show Quick Links

Table of Contents