Draytek Vigor2762 series User Manual page 515

Parameter
-r
ifno
-s
Example
Example
> ip6 aiccu -i 1 -r
reset AICCU Retry Account OK!
>
Telnet Command: ip6
Telnet Command: ip6
This command allows you to set IPv6 settings for NTP (Network Time Protocols) server.
ip6 ntp –h
ip6 ntp –v
ip6 ntp –p [0/1]
Syntax Description
Syntax Description
Parameter
–h
-v
-p <0/1>
Example
Example
> ip6 ntp -p 1
% Set NTP Priority: IPv6 First
Telnet Command: ip6 lan
Telnet Command: ip6 lan
This command allows you to configure settings for IPv6 LAN.
Syntax Syntax
ip6 lan -l n [-<l:w:d:D:m:o:s> <parameter> | ... ]
Syntax Description
Syntax Description
Parameter
–h
<l:w:d:D:m:o:s ><parameter>
-l n
-w n
Vigor2762 Series User's Guide
Description
Reset the AICCU retry account for the specified interace.
ifno=1, WAN1
ifno=2, WAN2
ifno=x, WANx
Show the interface status.
ntp
ntp
Description
It is used to display the usage of such command.
It is used to show the NTP state.
It is used to specify NTP server for IPv6.
0 – Auto
1 – First Query IPv6 NTP Server.
Description
It is used to display the usage of such command.
The following lists all of the available commands with parameters.
Select LAN interface to be set.
n = 1: LAN1. Default is LAN1.
n = 2: LAN2
n = x: LANx
Select WAN interface to be primary.
505