Draytek Vigor2762 series User Manual page 650

-T [Param]
-H [Param]
-A [Param]
User account
USER_NAME
-d [Param]
-q [Param]
-r [Param]
-t [Param]
-w [Param]
setdefault
Example
Example
>user account admin -d 0 -q 200 -r 1000 -t 1 -w MB
Disable the [admin] data quota limited
Telnet Command: appqos
Telnet Command: appqos
The command is used to configure QoS for APP..
Syntax
Syntax
appqos view
appqos enable[0/1]
appqos traceable [-v | -e AP_INDEX CLASS | -d AP_INDEX]
appqos untraceable
Syntax Description
Syntax Description
Parameter
view
enable[0/1]
traceable/ untraceable
-v
640
0:Disable
1:Enable
It means to set Authentication by Telnet.
0:Disable
1:Enable
It means to set Authentication by web page.
0:Disable
1:Enable
It means to set Authentication by Alert Tool.
0:Disable
1:Enable
It means to type a name of the user account.
It means to enable /disable data quota limitation for user account.
0:Disable
1:Enable
It means to set account time quota.
e.g., -q 200
It means to set account data quota.
e.g., -r 1000
It means to enable /disable time quota limitation for user account.
0:Disable
1:Enable
It means to set data quota unit (MB/GB).
Setup all of the user profiles to factory default configuration.
Description
It means to display current status of APP QoS.
It means to enable or disable the function of APP QoS.
The APPs are divided into traceable and untraceable based on
their properties.
It means to view the content of all traceable APs.
Vigor2762 Series User's Guide