Draytek Vigor2762 series User Manual page 467

3
4
5
6
7
8
9
Telnet Command:
Telnet Command:
This command can configure PVC to PVC binding. Such command is available only for PPPoE
and MPoA 1483 Bridge mode.
adsl pvcbinding [pvc_x pvc_y | status | -1 ]
Syntax Description
Syntax Description
Parameter
pvc_x
pvc_y
status
-1
Example Example
> adsl pvcbinding 3
set done. bind pvc3 to pvc5.
The above example means PVC3 has been bound to PVC5.
> adsl pvcbinding 3 -1
clear pvc-1 binding
The above example means the PVC3 binding group has been removed.
Telnet Command: adsl inventory
Telnet Command: adsl inventory
This command is used to display information about CO or CPE.
Syntax
Syntax
adsl inventory [co|cpe]
Syntax Description
Syntax Description
Parameter
co
cpe
Example
Example
>
adsl inventory co
xDSL inventory info only available in showtime.
> adsl inventory cpe
G.994 vendor ID
G.994.1 country code
Vigor2762 Series User's Guide
4 0
5 0
6 0
7 0
8 0
9 0
10 0
adsl pvcbinding
adsl pvcbinding
Description
The PVC number for the source.
The PVC number that the source PVC will be bound to.
Display a table for PVC binding group.
It means to clear specific PVC binding.
5
Description
It means DSLAM (Digital Subscriber Line Access Multiplexer) or CO
(Central Office).
It means CPE (Customer Premise Equipment).
: 0XB5004946544E5444
: 0XB500
457