Draytek Vigor2762 series User Manual page 250

Item
Service Type
Action
CSM
Move Up/Down
Next Filter Set
Wizard Mode
Advance Mode
To use Wizard Mode, simple do the following steps:
1. Click the Wizard Mode radio button.
2. Click one of the indexe number linke (e.g., Index 2) to access into the following page.
Available settings are explained as follows:
Item
Comments
Direction
240
Description
Display the protocol setting with source port and
destination port value.
Display the action taken when packets match the rule.
Display the CSM profile name used by such rule.
Use Up or Down link to move the order of the filter rules.
Set the link to the next filter set to be executed after the
current filter run. Do not make a loop with many filter sets.
Allow to configure frequently used settings of filter rule via
three setting pages
Allow to configure detailed settings of filter rule in one
page.
Description
Enter filter set comments/description. Maximum length is
14- character long.
Set the direction of packet flow. It is for Data Filter only.
For the Call Filter, this setting is not available since Call
Filter is only applied to outgoing traffic.
Vigor2762 Series User's Guide