Draytek Vigor2762 series User Manual page 532

Example
Example
> mngt rmtcfg ftp on
Enable server fail
Remote configure function has been disabled
please enable by enter mngt rmtcfg enable
> mngt rmtcfg enable
%% Remote configure function has been enabled.
> mngt rmtcfg ftp on
%% FTP server has been enabled.
Telnet Command:
Telnet Command:
This command allows users to manage accessing into Vigor router through LAN port.
mngt lanaccess -e [0/1] –s [value] –i [value]
mngt lanaccess –f
mngt lanaccess –d
mngt lanaccess –v
mngt lanaccess –h
Syntax Description Syntax Description
Parameter
-e[0/1]
-s[value]
-i[value]
-f
-d
-v
-h
Example
Example
> mngt lanaccess -e 1
> mngt lanaccess -s FTP,TELNET
> mngt lanaccess -i LAN3
> > mngt lanaccess -v
Current LAN Access Control Setting:
* Enable:Yes
522
off – disable the function.
mngt lanaccess
mngt lanaccess
Description
It means to enable/disable the function.
0-disable the function.
1-enable the function.
It means to specify service offered.
Available values include:
FTP, HTTP, HTTPS, TELNET, SSH, None, All
It means the interface which is allowed to access.
Available values include:
LAN2~LAN6, DMZ, IP Routed Subnet, None, All
Note: LAN1 is always allowed for accessing into the router.
It means to flush all of the settings.
It means to restore the factory default settings.
It means to view current settings.
It means to get the usage of such command.
Vigor2762 Series User's Guide