Draytek Vigor2762 series User Manual page 628

> vpn ike -q
IKE Memory Status and Leakage List
# of free L-Buffer=95, minimum=94, leak=1
# of free M-Buffer=529, minimum=529 leak=3
# of free S-Buffer=1199, minimum=1198, leak=1
# of free Msgid-Buffer=1024, minimum=1024
Telnet Command:
Telnet Command:
This command allows users to pass or block the multi-cast packet via VPN.
vpn Multicast set <H2l/L2l> <index> <Block/Pass>
Syntax Description
Syntax Description
Parameter
<H2l/L2l>
<index>
<Block/Pass>
Example
Example
> vpn Multicast set L2l 1 Pass
% Lan to Lan Profile Index [1] :
% Status Block/Pass: [PASS]
Telnet Command:
Telnet Command:
This command allows users to determine if the packets coming from the second subnet
passing through current used VPN tunnel.
vpn pass2nd[on]
vpn pass2nd [off]
Syntax Description
Syntax Description
Parameter
on/off
Example
Example
> vpn pass2nd on
% 2nd subnet is allowed to pass VPN tunnel!
Telnet Command:
Telnet Command:
This command allows users to determine if the packets passing through by NAT or not when
the VPN tunnel disconnects.
vpn pass2nat [on]
vpn pass2nat [off]
618
vpn Multicast
vpn Multicast
Description
H2l means Host to LAN (Remote Access User Accounts).
L2l means LAN-to-LAN Profile.
The index number of the profile.
Set Block/Pass the Multicast Packets.
The default is Block.
vpn pass2nd
vpn pass2nd
Description
on – the packets can pass through NAT.
off – the packets cannot pass through NAT.
vpn pass2nat
vpn pass2nat
Vigor2762 Series User's Guide