Draytek Vigor2762 series User Manual page 254

Source/Destination IP
Service Type
244
Click Edit to access into the following dialog to choose the
source/destination IP or IP ranges.
To set the IP address manually, please choose Any Address/
Single Address/Range Address/Subnet Address as the
Address Type and type them in this dialog. In addition, if
you want to use the IP range from defined groups or
objects, please choose Group and Objects as the Address
Type.
From the IP Group drop down list, choose the one that you
want to apply. Or use the IP Object drop down list to
choose the object that you want.
Click Edit to access into the following dialog to choose a
suitable service type.
To set the service type manually, please choose User
defined as the Service Type and type them in this dialog. In
addition, if you want to use the service type from defined
groups or objects, please choose Group and Objects as the
Service Type.
Protocol - Specify the protocol(s) which this filter rule will
apply to.
Vigor2762 Series User's Guide