Draytek Vigor2762 series User Manual page 591

Telnet Command:
Telnet Command:
This command allows users to restart the router automatically within a certain time.
sys autoreboot [on/off/hour(s)]
Syntax Description
Syntax Description
Parameter
on/off
hours
Example
Example
> sys autoreboot on
autoreboot is ON
> sys autoreboot 2
autoreboot is ON
autoreboot time is 2 hour(s)
Telnet Command:
Telnet Command:
This command allows users to save current settings to FLASH. Usually, current settings will
be saved in SRAM. Yet, this command will save the file to FLASH.
Example Example
> sys commit
>
Telnet Command:
Telnet Command:
This command can turn on TFTP server for upgrading the firmware.
Example
Example
> sys tftpd
% TFTP server enabled !!!
Telnet Command:
Telnet Command:
This command can display current country code and wireless region of this device.
Example Example
> sys cc
Country Code
Wireless Region Code: 0x30
>
Telnet Command:
Telnet Command:
This command can display current version for the system.
Vigor2762 Series User's Guide
sys autoreboot
sys autoreboot
Description
On – It means to enable the function of auto-reboot.
Off – It means to disable the function of auto-reboot.
It means to set the time schedule for router reboot.
For example, if you type "2" in this field, the router will reboot
with an interval of two hours.
sys commit
sys commit
sys tftpd
sys tftpd
sys cc
sys cc
: 0x 0 [International]
sys version
sys version
581