Show Power-Line-State; Clear Logbook - Siemens SCALANCE XM-400 Configuration Manual

Diagnostics
12.1 Event and fault handling
Syntax
Call up the command with the following parameters:
show interface transceiver details <if-id>
The parameter has the following meaning:
Parameter
if-id
Result
Hardware information (model, serial number) and operating parameters (data transmission
rate, voltage and current consumption as well as the transmit and receive power) for SFP
port are displayed.
12.1.3.9

show power-line-state

Description
This command shows the status of the power supply.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameters:
show power-line-state
Result
The status of the power supply is displayed.
12.1.4

clear logbook

Description
With this command, you delete the content of the logbook.
764
Description
Interface identifier
or
cli#
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 11/2015, C79000-G8976-C252-10