Search:serial:spi:pattern:width - Agilent Technologies InfiniiVision 3000 Programmer's Manual

27
:SEARch Commands

:SEARch:SERial:SPI:PATTern:WIDTh

Command Syntax
:SEARch:SERial:SPI:PATTern:WIDTh <width>
<width> ::= integer from 1 to 10
The :SEARch:SERial:SPI:PATTern:WIDTh command specifies the width of
the data value (in bytes) when searching for SPI events.
The data value is specified using the :SEARch:SERial:SPI:PATTern:DATA
command.
Query Syntax
:SEARch:SERial:SPI:PATTern:WIDTh?
The :SEARch:SERial:SPI:PATTern:WIDTh? query returns the current data
width setting.
Return Format
<width><NL>
<width> ::= integer from 1 to 10
See Also •
•
812
(see page 1088)
Chapter 27, ":SEARch Commands," starting on page 743
":SEARch:SERial:SPI:PATTern:DATA"
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
on page 811