Trigger:glitch:lessthan - Agilent Technologies InfiniiVision 3000 Programmer's Manual

:TRIGger:GLITch:LESSthan

Command Syntax
:TRIGger:GLITch:LESSthan <less_than_time>[<suffix>]
<less_than_time> ::= floating-point number in NR3 format
<suffix> ::= {s | ms | us | ns | ps}
The :TRIGger:GLITch:LESSthan command sets the maximum pulse width
duration for the selected :TRIGger:GLITch:SOURce.
Query Syntax
:TRIGger:GLITch:LESSthan?
The :TRIGger:GLITch:LESSthan? query returns the pulse width duration
time for :TRIGger:GLITch:SOURce.
Return Format
<less_than_time><NL>
<less_than_time> ::= floating-point number in NR3 format.
See Also •
•
•
•
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
(see page 1088)
"Introduction to :TRIGger Commands"
":TRIGger:GLITch:SOURce"
":TRIGger:GLITch:QUALifier"
":TRIGger:MODE" on page 851
on page 843
on page 880
on page 878
30
:TRIGger Commands
875