Measure:ppulses - Agilent Technologies InfiniiVision 3000 Programmer's Manual

19
:MEASure Commands

:MEASure:PPULses

Command Syntax
:MEASure:PPULses [<source>]
<source> ::= {CHANnel<n> | FUNCtion | MATH | WMEMory<r>}
<n> ::= 1 to (# analog channels) in NR1 format
<r> ::= 1-2 in NR1 format
The :MEASure:PPULses command installs a rising pulse count
measurement on screen. If the optional source parameter is not specified,
the current source is measured.
This command is not available if the source is FFT (Fast Fourier Transform).
N O T E
Query Syntax
:MEASure:PPULses? [<source>]
The :MEASure:PPULses? query measures and returns the on- screen rising
pulse count.
Return Format
<value><NL>
<value> ::= the rising pulse count in NR3 format
See Also
•
•
412
(see page 1088)
"Introduction to :MEASure Commands"
":MEASure:SOURce"
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
on page 388
on page 421