Power:inrush:apply - Agilent Technologies InfiniiVision 3000 Programmer's Manual

23
:POWer Commands

:POWer:INRush:APPLy

Command Syntax
:POWer:INRush:APPLy
The :POWer:INRush:APPLy command applies the inrush current analysis.
The Inrush current analysis measures the peak inrush current of the
power supply when the power supply is first turned on.
See Also •
•
•
524
(see page 1088)
":MEASure:PCURrent"
":POWer:INRush:EXIT"
":POWer:INRush:NEXT"
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
on page 460
on page 525
on page 526