30
:TRIGger Commands
:TRIGger:USB:SOURce:DPLus
Command Syntax
:TRIGger:USB:SOURce:DPLus <source>
<source> ::= {CHANnel<n> | EXTernal} for the DSO models
<source> ::= {CHANnel<n> | DIGital<d>} for the MSO models
<n> ::= 1 to (# analog channels) in NR1 format
<d> ::= 0 to (# digital channels - 1) in NR1 format
The :TRIGger:USB:SOURce:DPLus command sets the source for the USB D+
signal.
Query Syntax
:TRIGger:USB:SOURce:DPLus?
The :TRIGger:USB:SOURce:DPLus? query returns the current source for the
USB D+ signal.
Return Format
<source><NL>
See Also
•
•
•
•
920
(see
page
1088)
"Introduction to :TRIGger Commands"
":TRIGger:MODE"
on page 851
":TRIGger:USB:SOURce:DMINus"
":TRIGger:USB:TRIGger"
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
on page 843
on page 919
on page 922