Mtest:data - Agilent Technologies InfiniiVision 3000 Programmer's Manual

21
:MTESt Commands

:MTESt:DATA

Command Syntax
:MTESt:DATA <mask>
<mask> ::= binary block data in IEEE 488.2 # format.
The :MTESt:DATA command loads a mask from binary block data.
Query Syntax
:MTESt:DATA?
The :MTESt:DATA? query returns a mask in binary block data format. The
format for the data transmission is the # format defined in the IEEE 488.2
specification.
Return Format
<mask><NL>
<mask> ::= binary block data in IEEE 488.2 # format
See Also
•
•
482
(see page 1088)
":SAVE:MASK[:STARt]"
":RECall:MASK[:STARt]"
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
on page 584
on page 569