Wgen:arbitrary:data - Agilent Technologies InfiniiVision 3000 Programmer's Manual

:WGEN:ARBitrary:DATA

Command Syntax
:WGEN:ARBitrary:DATA {<binary> | <value>, <value> ...}
<binary> ::= floating point values between -1.0 to +1.0
<value> ::= floating point values between -1.0 to +1.0
The :WGEN:ARBitrary:DATA command downloads an arbitrary waveform in
floating- point values format.
See Also
•
•
•
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
(see page 1088)
in IEEE 488.2 binary block format
in comma-separated format
":WGEN:ARBitrary:DATA:DAC"
":SAVE:ARBitrary[:STARt]"
":RECall:ARBitrary[:STARt]"
on page 966
on page 576
on page 567
32
:WGEN Commands
963