Function:linear:offset - Agilent Technologies InfiniiVision 3000 Programmer's Manual

15
:FUNCtion Commands

:FUNCtion:LINear:OFFSet

(see page 1088)
Command Syntax
:FUNCtion:LINear:OFFSet <value>
<value> ::= 'B' in Ax + B, value in NR3 format
The :FUNCtion:LINear:OFFSet command specifies the 'B' value in the Ax +
B operation.
This command is available with the DSOX3ADVMATH advanced math
license.
Query Syntax
:FUNCtion:LINear:OFFSet?
The :FUNCtion:LINear:OFFSet query returns the offset value.
Return Format
<value><NL>
<value> ::= 'B' in Ax + B, value in NR3 format
See Also
• ":FUNCtion:OPERation" on page 331
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide 329