Wgen:frequency - Agilent Technologies InfiniiVision 3000 Programmer's Manual

:WGEN:FREQuency

Command Syntax
:WGEN:FREQuency <frequency>
<frequency> ::= frequency in Hz in NR3 format
For all waveforms except Noise and DC, the :WGEN:FREQuency command
specifies the frequency of the waveform.
You can also specify the frequency indirectly using the :WGEN:PERiod
command.
Query Syntax
:WGEN:FREQuency?
The :WGEN:FREQuency? query returns the currently set waveform
generator frequency.
Return Format
<frequency><NL>
<frequency> ::= frequency in Hz in NR3 format
See Also •
•
•
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
(see page 1088)
"Introduction to :WGEN Commands"
":WGEN:FUNCtion" on page 970
":WGEN:PERiod" on page 979
:WGEN Commands
on page 961
32
969