Trigger:glitch Commands - Agilent Technologies InfiniiVision 3000 Programmer's Manual

30
:TRIGger Commands

:TRIGger:GLITch Commands

Table 127 :TRIGger:GLITch Commands Summary
Command
:TRIGger:GLITch:GREat
erthan
<greater_than_time>[s
uffix] (see page
:TRIGger:GLITch:LESSt
han
<less_than_time>[suff
ix] (see page 875)
:TRIGger:GLITch:LEVel
<level> [<source>]
(see page 876)
:TRIGger:GLITch:POLar
ity <polarity> (see
page 877)
:TRIGger:GLITch:QUALi
fier <qualifier> (see
page 878)
872
Query
:TRIGger:GLITch:GREat
erthan? (see
page 874)
874)
:TRIGger:GLITch:LESSt
han? (see page
:TRIGger:GLITch:LEVel
? (see page
:TRIGger:GLITch:POLar
ity? (see page
:TRIGger:GLITch:QUALi
fier? (see page
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
Options and Query Returns
<greater_than_time> ::=
floating-point number in NR3
format
[suffix] ::= {s | ms | us | ns |
ps}
<less_than_time> ::=
875) floating-point number in NR3
format
[suffix] ::= {s | ms | us | ns |
ps}
For internal triggers, <level>
876) ::= .75 x full-scale voltage from
center screen in NR3 format.
For external triggers (DSO
models), <level> ::= ±(external
range setting) in NR3 format.
For digital channels (MSO
models), <level> ::= ±8 V.
<source> ::= {CHANnel<n> |
EXTernal} for DSO models
<source> ::= {CHANnel<n> |
DIGital<d>} for MSO models
<n> ::= 1 to (# analog channels)
in NR1 format
<d> ::= 0 to (# digital channels
- 1) in NR1 format
<polarity> ::= {POSitive |
877) NEGative}
<qualifier> ::= {GREaterthan |
878) LESSthan | RANGe}