Save:power[:Start] - Agilent Technologies InfiniiVision 3000 Programmer's Manual

:SAVE:POWer[:STARt]

Command Syntax
:SAVE:POWer[:STARt] [<file_name>]
<file_name> ::= quoted ASCII string
The :SAVE:POWer[:STARt] command saves the power measurement
application's current harmonics analysis results to a file.
If a file extension is provided as part of a specified <file_name>, it must be ".csv".
N O T E
See Also •
•
•
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
(see page 1088)
"Introduction to :SAVE Commands"
":SAVE:FILename" on page 577
Chapter 23, ":POWer Commands," starting on page 507
:SAVE Commands
on page 575
25
585