Hardcopy:destination - Agilent Technologies InfiniiVision 3000 Programmer's Manual

34
Obsolete and Discontinued Commands

:HARDcopy:DESTination

Command Syntax
:HARDcopy:DESTination <destination>
<destination> ::= {CENTronics | FLOPpy}
The :HARDcopy:DESTination command sets the hardcopy destination.
The :HARDcopy:DESTination command is an obsolete command provided for compatibility
N O T E
to previous oscilloscopes. Use the :HARDcopy:FILename command (see
instead.
Query Syntax
:HARDcopy:DESTination?
The :HARDcopy:DESTination? query returns the selected hardcopy
destination.
Return Format
<destination><NL>
<destination> ::= {CENT | FLOP}
See Also •
1012
(see page 1088)
"Introduction to :HARDcopy Commands"
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
page
on page 342
1013)