Search:serial:a429:Pattern:sdi - Agilent Technologies InfiniiVision 3000 Programmer's Manual

27
:SEARch Commands

:SEARch:SERial:A429:PATTern:SDI

Command Syntax
:SEARch:SERial:A429:PATTern:SDI <string>
<string> ::= "nn" where n ::= {0 | 1}, length always 2 bits
The :SEARch:SERial:A429:PATTern:SDI command defines the ARINC 429
two- bit SDI pattern resource according to the string parameter. This
pattern controls the SDI pattern searched for in each ARINC 429 word.
The specified SDI is only used if the :SBUS<n>:A429:FORMat includes the
SDI field.
Query Syntax
:SEARch:SERial:A429:PATTern:SDI?
The :SEARch:SERial:A429:PATTern:SDI? query returns the current settings
of the specified ARINC 429 two- bit SDI pattern resource in the binary
string format.
Return Format
<string><NL>
Errors •
See Also
•
•
•
•
•
772
(see page 1088)
"- 241, Hardware missing"
"Introduction to :TRIGger Commands"
":SBUS<n>:A429:FORMat"
":SEARch:SERial:A429:MODE"
":SEARch:SERial:A429:PATTern:DATA"
":SEARch:SERial:A429:PATTern:SSM"
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
on page 1049
on page 843
on page 607
on page 770
on page 771
on page 773