Trigger:transition:source - Agilent Technologies InfiniiVision 3000 Programmer's Manual

30
:TRIGger Commands

:TRIGger:TRANsition:SOURce

Command Syntax
:TRIGger:TRANsition:SOURce <source>
<source> ::= CHANnel<n>
<n> ::= 1 to (# analog channels) in NR1 format
The :TRIGger:TRANsition:SOURce command selects the channel used to
produce the trigger.
Query Syntax
:TRIGger:TRANsition:SOURce?
The :TRIGger:TRANsition:SOURce? query returns the current transition
trigger source.
Return Format
<source><NL>
<source> ::= CHAN<n>
See Also •
•
•
906
(see page 1088)
"Introduction to :TRIGger Commands"
":TRIGger:MODE" on page 851
":TRIGger:TRANsition:SLOPe"
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
on page 843
on page 905