Search:serial:flexray:frame - Agilent Technologies InfiniiVision 3000 Programmer's Manual

27
:SEARch Commands

:SEARch:SERial:FLEXray:FRAMe

Command Syntax
:SEARch:SERial:FLEXray:FRAMe <frame_id>
<frame_id> ::= {ALL | <frame #>}
<frame #> ::= integer from 1-2047
The :SEARch:SERial:FLEXray:FRAMe command specifies the frame ID
value to find when searching for FlexRay frames.
Query Syntax
:SEARch:SERial:FLEXray:FRAMe?
The :SEARch:SERial:FLEXray:FRAMe? query returns the current frame ID
setting.
Return Format
<frame_id><NL>
<frame_id> ::= {ALL | <frame #>}
<frame #> ::= integer from 1-2047
See Also •
•
784
(see page 1088)
Chapter 27, ":SEARch Commands," starting on page 743
":SEARch:SERial:FLEXray:MODE"
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
on page 785