15
:FUNCtion Commands
:FUNCtion:FREQuency:LOWPass
(see
page
1088)
Command Syntax
:FUNCtion:FREQuency:LOWPass <3dB_freq>
<3dB_freq> ::= -3dB cutoff frequency value in NR3 format
The :FUNCtion:FREQuency:LOWPass command sets the low- pass filter's
- 3 dB cutoff frequency.
The low- pass filter is a 4th order Bessel- Thompson filter.
This command is available with the DSOX3ADVMATH advanced math
license.
Query Syntax
:FUNCtion:FREQuency:LOWPass?
The :FUNCtion:FREQuency:LOWPass query returns the low- pass filter's
cutoff frequency.
Return Format
<3dB_freq><NL>
<3dB_freq> ::= -3dB cutoff frequency value in NR3 format
See Also
•
":FUNCtion:OPERation"
on page 331
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
323