Sbus<N>:A429:Signal - Agilent Technologies InfiniiVision 3000 Programmer's Manual

26
:SBUS<n> Commands
:SBUS<n>:A429:SIGNal
Command Syntax
:SBUS<n>:A429:SIGNal <signal>
<signal> ::= {A | B | DIFFerential}
The :SBUS<n>:A429:SIGNal command specifies the signal type:
• A — Line A (non- inverted).
• B — Line B (inverted).
• DIFFerential — Differential (A- B).
Query Syntax
:SBUS<n>:A429:SIGNal?
The :SBUS<n>:A429:SIGNal? query returns the current ARINC 429 signal
type setting.
Return Format
<signal><NL>
<signal> ::= {A | B | DIFF}
Errors •
See Also
•
•
•
•
•
608
(see page 1088)
"- 241, Hardware missing"
"Introduction to :SBUS<n> Commands"
":SBUS<n>:MODE" on page 599
":SBUS<n>:A429:FORMat"
":SBUS<n>:A429:SPEed"
":SBUS<n>:A429:SOURce"
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
on page 1049
on page 595
on page 607
on page 610
on page 609