Search:glitch:source - Agilent Technologies InfiniiVision 3000 Programmer's Manual

:SEARch:GLITch:SOURce

Command Syntax
:SEARch:GLITch:SOURce <source>
<source> ::= CHANnel<n>
<n> ::= 1 to (# analog channels) in NR1 format
The :SEARch:GLITch:SOURce command selects the channel on which to
search for glitches (pulse widths).
Query Syntax
:SEARch:GLITch:SOURce?
The :SEARch:GLITch:SOURce? query returns the current pulse width
source.
If all channels are off, the query returns "NONE."
Return Format
<source><NL>
See Also
•
•
•
•
•
•
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
(see page 1088)
Chapter 27, ":SEARch Commands," starting on page 743
Chapter 27, ":SEARch Commands," starting on page 743
":SEARch:MODE" on page 746
":SEARch:GLITch:POLarity"
":SEARch:GLITch:QUALifier"
":SEARch:GLITch:RANGe"
on page 754
on page 755
on page 756
27
:SEARch Commands
757