Trigger:usb:source:dminus - Agilent Technologies InfiniiVision 3000 Programmer's Manual

:TRIGger:USB:SOURce:DMINus

Command Syntax
:TRIGger:USB:SOURce:DMINus <source>
<source> ::= {CHANnel<n> | EXTernal} for the DSO models
<source> ::= {CHANnel<n> | DIGital<d>} for the MSO models
<n> ::= 1 to (# analog channels) in NR1 format
<d> ::= 0 to (# digital channels - 1) in NR1 format
The :TRIGger:USB:SOURce:DMINus command sets the source for the USB
D- signal.
Query Syntax
:TRIGger:USB:SOURce:DMINus?
The :TRIGger:USB:SOURce:DMINus? query returns the current source for
the USB D- signal.
Return Format
<source><NL>
See Also •
•
•
•
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
(see page 1088)
"Introduction to :TRIGger Commands"
":TRIGger:MODE" on page 851
":TRIGger:USB:SOURce:DPLus"
":TRIGger:USB:TRIGger"
on page 843
on page 920
on page 922
30
:TRIGger Commands
919