23
:POWer Commands
:POWer:MODulation:SOURce
Command Syntax
:POWer:MODulation:SOURce <source>
<source> ::= {V | I}
The :POWer:MODulation:SOURce command selects either the voltage source
or the current source as the source for the modulation analysis.
Query Syntax
:POWer:MODulation:SOURce?
The :POWer:MODulation:SOURce query returns the selected source for the
modulation analysis.
Return Format
<source><NL>
<source> ::= {V | I}
See Also
•
•
528
(see
page
1088)
":POWer:MODulation:APPLy"
":POWer:MODulation:TYPE"
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
on page 527
on page 529