Save:wmemory[:Start] - Agilent Technologies InfiniiVision 3000 Programmer's Manual

25
:SAVE Commands

:SAVE:WMEMory[:STARt]

Command Syntax
:SAVE:WMEMory[:STARt] [<file_name>]
<file_name> ::= quoted ASCII string
The :SAVE:WMEMory[:STARt] command saves oscilloscope waveform data
to a reference waveform file.
If a file extension is provided as part of a specified <file_name>, it must be ".h5".
N O T E
See Also •
•
•
594
(see page 1088)
"Introduction to :SAVE Commands"
":SAVE:WMEMory:SOURce"
":RECall:WMEMory<r>[:STARt]"
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
on page 575
on page 593
on page 572