23
:POWer Commands
:POWer:ENABle
(see
page
1088)
Command Syntax
:POWer:ENABle {{0 | OFF} | {1 | ON}}
The :POWer:ENABle command enables or disables power analysis.
Query Syntax
:POWer:ENABle?
The :POWer:ENABle query returns a 1 or a 0 showing whether power
analysis is enabled or disabled, respectively.
Return Format
{0 | 1}
See Also
•
Chapter
20, ":MEASure Power Commands," starting on page 447
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
513