Sbus<N>:A429:Base - Agilent Technologies InfiniiVision 3000 Programmer's Manual

:SBUS<n>:A429:BASE
Command Syntax
:SBUS<n>:A429:BASE <base>
<base> ::= {BINary | HEX}
The :SBUS<n>:A429:BASE command selects between hexadecimal and
binary display of the decoded data.
The BASE command has no effect on the SDI and SSM fields, which are
always displayed in binary, nor the Label field, which is always displayed
in octal.
Query Syntax
:SBUS<n>:A429:BASE?
The :SBUS<n>:A429:BASE? query returns the current ARINC 429 base
setting.
Return Format
<base><NL>
<base> ::= {BIN | HEX}
Errors
•
See Also
•
•
•
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
(see page 1088)
"- 241, Hardware missing"
"Introduction to :SBUS<n> Commands"
":SBUS<n>:MODE" on page 599
":SBUS<n>:A429:FORMat"
on page 1049
on page 595
on page 607
26
:SBUS<n> Commands
603