Search:serial:lin:pattern:data:length - Agilent Technologies InfiniiVision 3000 Programmer's Manual

:SEARch:SERial:LIN:PATTern:DATA:LENGth

Command Syntax
:SEARch:SERial:LIN:PATTern:DATA:LENGth <length>
<length> ::= integer from 1 to 8 in NR1 format
The :SEARch:SERial:LIN:PATTern:DATA:LENGth command specifies the the
length of the data value when searching for LIN events.
The data value is specified using the :SEARch:SERial:LIN:PATTern:DATA
command.
Query Syntax
:SEARch:SERial:LIN:PATTern:DATA:LENGth?
The :SEARch:SERial:LIN:PATTern:DATA:LENGth? query returns the current
data value length setting.
Return Format
<length><NL>
<length> ::= integer from 1 to 8 in NR1 format
See Also •
•
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
(see page 1088)
Chapter 27, ":SEARch Commands," starting on page 743
":SEARch:SERial:LIN:PATTern:DATA"
:SEARch Commands
on page 802
27
803