Wgen:arbitrary:data:dac - Agilent Technologies InfiniiVision 3000 Programmer's Manual

32
:WGEN Commands

:WGEN:ARBitrary:DATA:DAC

Command Syntax
:WGEN:ARBitrary:DATA:DAC {<binary> | <value>, <value> ...}
<binary> ::= decimal 16-bit integer values between -512 to +511
<value> ::= decimal integer values between -512 to +511
The :WGEN:ARBitrary:DATA:DAC command downloads an arbitrary
waveform using 16- bit integer (DAC) values.
See Also
•
•
•
966
(see page 1088)
in IEEE 488.2 binary block format
in comma-separated NR1 format
":WGEN:ARBitrary:DATA"
":SAVE:ARBitrary[:STARt]"
":RECall:ARBitrary[:STARt]"
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
on page 963
on page 576
on page 567