Trigger:runt:qualifier - Agilent Technologies InfiniiVision 3000 Programmer's Manual

30
:TRIGger Commands

:TRIGger:RUNT:QUALifier

Command Syntax
:TRIGger:RUNT:QUALifier <qualifier>
<qualifier> ::= {GREaterthan | LESSthan | NONE}
The :TRIGger:RUNT:QUALifier command selects the qualifier used for
specifying runt pulse widths:
• GREaterthan — triggers on runt pulses whose width is greater than the
• LESSthan — triggers on runt pulses whose width is less than the
• NONE — triggers on runt pulses of any width.
Query Syntax
:TRIGger:RUNT:QUALifier?
The :TRIGger:RUNT:QUALifier? query returns the runt trigger qualifier
setting.
Return Format
<qualifier><NL>
<qualifier> ::= {GRE | LESS NONE}
See Also
•
•
•
894
(see page 1088)
:TRIGger:RUNT:TIME.
:TRIGger:RUNT:TIME.
"Introduction to :TRIGger Commands"
":TRIGger:MODE" on page 851
":TRIGger:RUNT:TIME"
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
on page 843
on page 896