:SEARch:SERial:A429:PATTern:DATA
Command Syntax
:SEARch:SERial:A429:PATTern:DATA <string>
<string> ::= "nn...n" where n ::= {0 | 1}, length depends on FORMat
The :SEARch:SERial:A429:PATTern:DATA command defines the ARINC 429
data pattern resource according to the string parameter. This pattern
controls the data pattern searched for in each ARINC 429 word.
If more bits are sent for <string> than specified by the :SBUS<n>:A429:FORMat command,
N O T E
the most significant bits will be truncated.
Query Syntax
:SEARch:SERial:A429:PATTern:DATA?
The :SEARch:SERial:A429:PATTern:DATA? query returns the current
settings of the specified ARINC 429 data pattern resource in the binary
string format.
Return Format
<string><NL>
Errors
•
See Also
•
•
•
•
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
(see
page
1088)
"- 241, Hardware missing"
"Introduction to :TRIGger Commands"
":SEARch:SERial:A429:MODE"
":SEARch:SERial:A429:PATTern:SDI"
":SEARch:SERial:A429:PATTern:SSM"
on page 1049
on page 843
on page 770
on page 772
on page 773
27
:SEARch Commands
771