Power:modulation:apply - Agilent Technologies InfiniiVision 3000 Programmer's Manual

:POWer:MODulation:APPLy

Command Syntax
:POWer:MODulation:APPLy
The :POWer:MODulation:APPLy command applies the selected modulation
analysis type (:POWer:MODulation:TYPE).
The Modulation analysis measures the control pulse signal to a switching
device (MOSFET) and observes the trending of the pulse width, duty cycle,
period, frequency, etc. of the control pulse signal.
See Also •
•
•
•
•
•
•
•
•
•
•
•
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
(see page 1088)
":POWer:MODulation:SOURce"
":POWer:MODulation:TYPE"
":MEASure:VAVerage"
":MEASure:VRMS" on page 440
":MEASure:VRATio" on page 439
":MEASure:PERiod" on page 410
":MEASure:FREQuency"
":MEASure:PWIDth" on page 414
":MEASure:NWIDth"
":MEASure:DUTYcycle"
":MEASure:RISetime"
":MEASure:FALLtime"
on page 528
on page 529
on page 434
on page 403
on page 406
on page 401
on page 418
on page 402
23
:POWer Commands
527