Power:slew:source - Agilent Technologies InfiniiVision 3000 Programmer's Manual

:POWer:SLEW:SOURce

Command Syntax
:POWer:SLEW:SOURce <source>
<source> ::= {V | I}
The :POWer:SLEW:SOURce command selects either the voltage source or
the current source as the source for the slew rate analysis.
Query Syntax
:POWer:SLEW:SOURce?
The :POWer:SLEW:SOURce query returns the selected source for the slew
rate analysis.
Return Format
<source><NL>
<source> ::= {V | I}
See Also
•
•
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
(see page 1088)
":POWer:SLEW:APPLy"
":POWer:SLEW:VALue"
on page 550
on page 552
23
:POWer Commands
551