Sbus<N>:Flexray:trigger:frame:type - Agilent Technologies InfiniiVision 3000 Programmer's Manual

:SBUS<n>:FLEXray:TRIGger:FRAMe:TYPE
Command Syntax
:SBUS<n>:FLEXray:TRIGger:FRAMe:TYPE <frame_type>
<frame_type> ::= {NORMal | STARtup | NULL | SYNC | NSTArtup | NNULl |
The :SBUS<n>:FLEXray:TRIGger:FRAMe:TYPE command sets the FlexRay
frame type to trigger on. The frame type setting is only valid when the
FlexRay trigger mode is set to FRAME.
• NORMal — will trigger on only normal (NSTArtup & NNULl & NSYNc)
• STARtup — will trigger on only startup frames.
• NULL — will trigger on only null frames.
• SYNC — will trigger on only sync frames.
• NSTArtup — will trigger on frames other than startup frames.
• NNULl — will trigger on frames other than null frames.
• NSYNc — will trigger on frames other than sync frames.
• ALL — will trigger on all FlexRay frame types.
Query Syntax
:SBUS<n>:FLEXray:TRIGger:FRAMe:TYPE?
The :SBUS<n>:FLEXray:TRIGger:FRAMe:TYPE? query returns the current
frame type setting for the FlexRay frame trigger setup.
Return Format
<frame_type><NL>
<frame_type> ::= {NORM | STAR | NULL | SYNC | NSTA | NNUL |
See Also
•
•
•
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
(see page 1088)
NSYNc | ALL}
frames.
NSYN | ALL}
"Introduction to :TRIGger Commands"
":TRIGger:MODE" on page 851
":SBUS<n>:FLEXray:TRIGger"
on page 843
on page 645
26
:SBUS<n> Commands
653